Elements LED In-Wall: Water

Designed by: Doyle Crosby

Model # 10675

Envisioned as a wayfinding marker or illuminated art piece, these 3′ or 4′ tall linear lighting fixtures are recessed into the wall. On the surface of the wall, only a minimal frame is visible, but inside the wall light flows forth. The steel outer frame comes primed for painting to match any interior or is available blackened. At the back of the channel is a plate made of a mirrored panel with clear half-spheres resembling water drops which are covered with a two-way mirror creating an infinity effect. Around the sides of the channel is a strip of LEDs that radiates bright, warm, ambient light. Dim for romance, brighten for impact.

LEARN MORE: Get an in-depth look at the entire Elements Series. Go!

Dimensions

3′
W 5⅝” x H 3′ x D ⅛”
W 14.3 cm x H 91.44 cm x D 3 mm

4′
W 5⅝” x H 4′ x D ⅛”
W 14.3 cm x H 121.92 cm x D 3 mm

Net Weight

3' 16 lb. 7.3 kg. 4' 21 lb. 9.5 kg.

Lamping

LED lamps included offer 2700°k, 90+ CRI illumination at 120 or 277v. The 3′ version includes 40 watt LED lamps and the 4′ version includes 56 watt LED lamps. Fixture can be dimmed using 0-10v low voltage dimming controls and wiring.

Additional Information

Outer Frame: available in White Primer for painting (standard), or Blackened Steel (upcharge). Horizontal or vertical mounting. This fixture requires recessed mounting. UL listed (or equivalent) for damp locations. Reflector: Mirrored panel with clear half-spheres. Cover Lens: Two-way mirror. Combination of mirrored panel and two-way mirrored cover lens creates an infinity reflection.

Available Finishes

Blackened Steel

White Primer

* Specialty

Elements LED In-Wall: Water